Nyvoll Dresser, Ikea $299
IKEA Malm Occasional Table, $75 available, furniture
color white
dimensions Width: 75 1/4 ", Depth: 14 1/8 ", Height: 2 ' 5 "
price $75
beige leather tufted headboard
The Alder wood frame is covered in platinum-hued velvet. $$4,535.00 at neimanmarcus
Curved dressing table/desk in 'Fineline' birch veneer with satin aluminium drawer pulls, chromed legs and removable mirrors
Designed by John & Sylvia Reid in 1959 for Stag Cabinet Company, Nottingham. W136xH109xD46cm
£295
Furniture123 Verona Birch 6 Drawer Dressing Table
The Verona Birch range is a contemporary range of bedroom furniture with a modern white fronted
IKEA Aneboda Birch Dresser
2 IKEA Aneboda Dresser redesigned
Materials: Fabric, 2 Aneboda Dressers
Description:
1. Using the cardboard packaging from the dressers, I measured out 6 rectangular panels, marking where to cut each panel with masking tape.
2. With an X-acto knife
, I sandwiched the cardboard between two cutting boards. The bottom cutting board would protect our beautiful hardwood floors from getting scratched, and the top cutting board served as a second guide (in addition to the tape) for where I needed to cut each panel. I stuck each panel in front of the translucent dresser front to make sure it would fit. The translucent parts of the drawers aren't flush with the frame holding them, so a cardboard insert would make each drawer front flush with its frame as I cut the panels exactly right. Luckily, I had, which was nothing short of a miracle. My belly made it hard to find a comfortable working position, so I spent a good half-hour of my time rolling around on the floor, splayed in various not-so-ladylike positions, trying to get the X-acto blade in exactly the right place for cutting the panels.
3. Using two yards of fabric I purchased online, I cut out six pieces of fabric just slightly (less than 1/2 an inch) larger than each of my panels and used hot glue to secure each fabric piece to the cardboard. To make sure that the fabric stayed in place, I used packing tape over each glued side.
4. With some heavy-duty double-sided tape (think carpet tape), I secured each panel to a dresser front.
The whole project cost me less than $20 and only took an afternoon, even with my 30-minute belly adjustment period.
See more of the Aneboda dresser.
~ Ann K., Kuala Lumpur, Malaysia
Description:
1. Using the cardboard packaging from the dressers, I measured out 6 rectangular panels, marking where to cut each panel with masking tape.
2. With an X-acto knife
, I sandwiched the cardboard between two cutting boards. The bottom cutting board would protect our beautiful hardwood floors from getting scratched, and the top cutting board served as a second guide (in addition to the tape) for where I needed to cut each panel. I stuck each panel in front of the translucent dresser front to make sure it would fit. The translucent parts of the drawers aren't flush with the frame holding them, so a cardboard insert would make each drawer front flush with its frame as I cut the panels exactly right. Luckily, I had, which was nothing short of a miracle. My belly made it hard to find a comfortable working position, so I spent a good half-hour of my time rolling around on the floor, splayed in various not-so-ladylike positions, trying to get the X-acto blade in exactly the right place for cutting the panels. 
3. Using two yards of fabric I purchased online, I cut out six pieces of fabric just slightly (less than 1/2 an inch) larger than each of my panels and used hot glue to secure each fabric piece to the cardboard. To make sure that the fabric stayed in place, I used packing tape over each glued side.
4. With some heavy-duty double-sided tape (think carpet tape), I secured each panel to a dresser front.
The whole project cost me less than $20 and only took an afternoon, even with my 30-minute belly adjustment period.
See more of the Aneboda dresser.
~ Ann K., Kuala Lumpur, Malaysia
Closet Inspired by Joan Crawford's closet in Mommie Dearest
Ikea Sultan Sandane Round Mattress
Ikea Sultan Sandane Round Mattress
Discontinued. Was priced at ($875).
A wooden spring loaded base that comes apart in four pieces (like a pie). Wrapped in cotton, it is topped with a 100% cotton ticking mattress pad (one piece) that can be turned over and cleaned whenever necessary.
Sexy Bedroom, Sleigh Bed
Dream Bedroom, Riverview
0 comments:
Post a Comment